How to Install Your Wallpaper

Our premium wallpaper uses the Paste-the-Wall method, making installation seamless. Here’s your step-by-step guide. Before you start, here's a list of some wallpaper tools you might need.

Before You Begin

• Let your wallpaper sit unrolled for 24 hours in the room where it will be installed
• Ensure your wall is smooth, clean, and dry
• Gather your tools: wallpaper paste, smoother, brush, level, sharp knife, sponge, and measuring tape
• Installation is more fun with a helper—invite a friend and promise them pizza

Step 1: Prepare the Strips

• Cut along the dotted lines to separate each numbered wallpaper strip
• Lay them out in numerical order from left to right

Step 2: Applying Paste

• Use a pencil to mark where the first strip will go
• Apply paste directly to the wall evenly—cover a few extra inches past your mark

Step 3: Hanging the First Strip

• Start from the top, carefully aligning the wallpaper with your guide mark
• Smooth out air bubbles with a brush or smoother
• Wipe off excess paste immediately with a damp sponge

Step 4: Hanging the Remaining Strips

• Apply paste section by section as you work
• Match the design at the edges without overlapping
• Press the strips together firmly to avoid visible seams

Step 5: Trimming and Drying

• Use a sharp knife to trim excess wallpaper at the ceiling and floor
• Let dry for 24 hours with good ventilation
• Step back and admire your stunning new wall!

If you have any questions or concerns, write to us at contact@wildpalace.com for additional support.